Friday and Saturday for both me and shag. Looking forward to it again!

Stick me down for Friday and Saturday!

Still undecided on which car is going to be there tho

I found this pic very helpful when I originally did my conversion http://i240.photobucket.com/albums/ff204/Birdyvw/Harness2B.jpg This is what each wire does A - ECU vacuum feed, mine is fed off a 'T' piece from the brake servo hose B - Not used for the conversion (fuel pump wiring on the golf's) C -...

I'd assume it's from all the rain we've had lately!


Make sure the plenum is clear and check its not finding its way in from on top of the fuse box. Could also be the screen seal.

Give C&R Enterprises a ring, they do the full range of powerflex/superpro/vibra technics and prothane bushes!

Found them really helpful when i replaced all of my suspension bushes last year

Thanks Sander

Still the same, the image size is 590 x 98 so under the 600 x 100 size limit

Nope, still getting the same error message

Not able to change my siggy image again, the image is within the size needed but keep getting the 'It was not possible to determine the dimensions of the image' message

I'd check the plunger first, I can't see the WUR causing the problem but as Simon above has said you can unplug it.

Do you have any spare injectors to try just incase its the injectors at fault?

Been a while since i've posted any updates, not done too much with the car since it was MOT'd. The downpipe developed an annoying rattle as the springs(?) up by the minifold have lost a bit of tension and the exhaust gas was making is rattle! So, off the damned thing came so i could heat wrap it htt...

There are different thickness pads avilable for this setup - i'm running the same setup and have had the same problem with getting the right pads.

You need the thinnest ones that are available, i have the mintex part number somewhere if you want me to dig it up and post it on here?

ebay, not a bad price on there!

My local motor factors stocks it, not cheap but it is good stuff

Not had a renewal noitice yet, can i have a form please?

Spot on, deffo 19mm socket to remove them