Many thanks, guys !!
den

The windscreen wiper fuse blows regularly -4/5 times a year on my 92 Rocco. No other component is covered by that fuse.
Any thoughts/advice on cause/fix?
I'm not gifted on electrics, so please be patient !!
cheers
den

Hi
Can anyone suggest where I might get a replacement LCD clock for my instrument cluster? I have now replaced the main beam blue LED and the 3 panel lights and I would like to sort out the bled-out LCD while the cluster is out of the car.
It's a bit of a fiddle getting the cluster in and out of ...

Hi
Extremely impressive !!!
Can you give me a pointer as to where to get hold of a replacement LCD clock - you changed your bled out one for a new one, I see.
cheers
den

Don't mess about with circuit boards. Probably just the LED itself has failed. Get another - just over a fiver from VW dealer. Or take the one out of your spare instrument panel. Installation is straightforward. Come back if you need help.

Hi Mac
Had another go, followed your advice, and did it with no problem!
Beats removing the heater, etc from inside - big time!!
Most grateful again.
best wishes
den

Many thanks Mac. I'll give it another go! Sorry I didn't reply sooner, but just back tonight after a 2 week holiday in Egypt. I very much appreciate your advice.
cheers
den

Thanks Mac
Did you have problems separating the blower casing?
I had to give up after removing the window wiper assembly and finding that there was still not enough clearance to get the complete motor unit out. I did not try to split the casing. There seemed to be umteen catches drawing together the ...

I'm also looking for replacement rear view mirror 1992 scirocco GT2. The plastic casing on mine has simply disintegrated after 7 years sitting in driveway. Just got it back on road and MOTed.
Anyone out there got one?
den

Thanks Mixter. Extremely helpful!!
cheers
den

Hi
I need to replace the heater blower motor on my 1992 Gt2 rocco. Can anyone advise me if this can be done via the engine compartment, without removing the heater itself?
den

Hi Guys
Tried again. No joy. Ended up cutting out the rubber boot, clamping the exposed joint with a mole and undoing the lower nut. Trashed the ball joint of course but reckoned would be less trouble fitting a new one.
Thanks again.
den

THanks guys.I'll give it a try tomorrow.
Much appreciate your advice,
den

Hi all
Got a problem! Renewing a driveshaft and when putting things back together I find that the track rod ball joint bolt is turning with the lock nut as I tighten. I was able to tighten it up to a point where I now can't unscrew the nut either. I might have inadvertently got some grease into the ...