Search found 15 matches

by blackwedge
Wed Nov 29, 2017 5:38 pm
Forum: Engines
Topic: DX engine piper cam woes
Replies: 3
Views: 1898

Re: DX engine piper cam woes

Hi Chopperoli

checked the ht leads order, all good, I think maybe somehow the timing has skipped on the cam belt. maybe I need to fit a dedicated piper cam vernier pulley as the stock one will always be out, just thought that now, maybe stock pulley will not work.

thanks for the suggestion, its ...
by blackwedge
Wed Nov 29, 2017 5:06 pm
Forum: Engines
Topic: DX engine piper cam woes
Replies: 3
Views: 1898

DX engine piper cam woes

Evening all, A bit of a long story so i'll be brief:

Fitted piper fast road cam and piper followers, made very sure to zip tie the cam belt to the pulley BEFORE removing old cam to maintain timing alignment, replaced cam, checked dizzy arm was still lined up to the line, it was. Put everything back ...
by blackwedge
Thu Mar 02, 2017 3:03 pm
Forum: Fueling and Exhaust
Topic: kent cam advice
Replies: 4
Views: 1771

Re: kent cam advice

Thanks folks for the advice, I think I will go for the newman 268 cam, its a good price and seems to have a better rep than the kent.


Once again thanks, have a great weekend.
by blackwedge
Wed Mar 01, 2017 5:17 pm
Forum: Fueling and Exhaust
Topic: kent cam advice
Replies: 4
Views: 1771

kent cam advice

Hi guys and girls,

I finally after a two and a half year wait have the reconditioned engine (DX) and gearbox in my beloved rocco, including a stainless manifold and jetex exhaust, she's now fully run in and goes really well and sounds amazing. My question is to you lovely people is: is it worth ...
by blackwedge
Fri Mar 06, 2015 3:29 pm
Forum: Fueling and Exhaust
Topic: HELP !!WRONG stainless exhaust header
Replies: 1
Views: 954

HELP !!WRONG stainless exhaust header

HELP !!! Good afternoon all, spring seems to be in the air so it was with a spring in my step that I nipped into my mechanics workshop to see how my beloved rocco was getting on ref; the rebuilt engine , when the look on his face said it all. Houston we have a problem..... I purchased a nice shiny ...
by blackwedge
Thu Dec 11, 2014 3:27 pm
Forum: Fueling and Exhaust
Topic: injectors for dx code engine..
Replies: 8
Views: 3070

Re: injectors for dx code engine..

Hi Guys,
just back from the garage where I have had the chance to check my engine, and yes there is a hose outlet between injectors 3 and 4.As I have no injectors currently in the engine(thus my current attempts to get info to buy some) I cannot measure the thread size as I have no injectors to ...
by blackwedge
Thu Dec 04, 2014 8:56 pm
Forum: Fueling and Exhaust
Topic: injectors for dx code engine..
Replies: 8
Views: 3070

Re: injectors for dx code engine..

Hi Mark,
thanks for your reply, My car is an 1988 GTX 8v with 1781cc DX code engine, Joost, posted a reply on another thread I quote : Depending on threadsize on the injectors you need :

026133551
injector valve / F 53-F-000 001>> 53-G-040 000* / F 53-F-000 001>> 53-G-060 000*
M12X1,5 / DX,KT JH ...
by blackwedge
Wed Dec 03, 2014 8:07 pm
Forum: Part number queries and NOW translation queries too
Topic: part number for injectors
Replies: 1
Views: 1664

part number for injectors

Good evening all, I am about to order some new injectors for my 'rocco but want to make sure I get the right ones. The engine code is DX (17891cc). Does anyone know if there are replacements that would upgrade the performance of the O.E ones or should I stick to standard? (It's a long story but the ...
by blackwedge
Wed Dec 03, 2014 8:05 pm
Forum: Fueling and Exhaust
Topic: injectors for dx code engine..
Replies: 8
Views: 3070

Re: injectors for dx code engine..

oops, just realised that I'm the wrong section for technical section, I shall re-post in the correct place.

;-)
by blackwedge
Wed Dec 03, 2014 7:54 pm
Forum: Fueling and Exhaust
Topic: injectors for dx code engine..
Replies: 8
Views: 3070

injectors for dx code engine..

Good evening all, I am about to order some new injectors for my 'rocco but want to make sure I get the right ones. The engine code is DX (17891cc). Does anyone know if there are replacements that would upgrade the performance of the O.E ones or should I stick to standard? (It's a long story but the ...
by blackwedge
Mon Apr 21, 2014 9:09 pm
Forum: Engines
Topic: corrado 2l 16v into mk2 'rocco
Replies: 9
Views: 2772

Re: corrado 2l 16v into mk2 'rocco

Hey Tim, my current engine is the 1.8 8v DX code engine, if i could get hold of a wiring diagram pertaining to this particular engine swap I figure it will be worth it, my rocco is my only car so i don't want it off the road for months. its the endless trial and error that i'm trying to avoid.Anyway ...
by blackwedge
Mon Apr 21, 2014 2:19 pm
Forum: Engines
Topic: corrado 2l 16v into mk2 'rocco
Replies: 9
Views: 2772

Re: corrado 2l 16v into mk2 'rocco

thanks to all for replying,

I've done it on mine and used the 9a management mostly because I had it and knew it all worked properly in the car it came out of.
Physically it will fit in the bay easily, its the same height as the KR 16v, already has the mounting holes for the cambelt end engine ...
by blackwedge
Thu Apr 17, 2014 5:00 pm
Forum: Engines
Topic: corrado 2l 16v into mk2 'rocco
Replies: 9
Views: 2772

corrado 2l 16v into mk2 'rocco

Hey fellow roccophiles, last week I was offered a 95 corrado 2 litre 16v for 300 squids, which I quickly snapped up. The owner had it sat in a field for a year or so and wanted rid of it. I originally bought it to put the leather seats into my rocco, which I have done, but on closer inspection, it ...
by blackwedge
Thu Jan 30, 2014 4:53 pm
Forum: Fueling and Exhaust
Topic: replacement breather /vacuum hose
Replies: 2
Views: 1008

replacement breather /vacuum hose

hello all,

I'm a newbie to this forum and have just finished my introductions on the introduce yourself thread and now I am in need of some some fellow rocco lovers advice. As I'm sure many of you know the clutch cable on RHD drive cars is prone to rupture the bulk head. Mine did and is now sorted ...
by blackwedge
Thu Jan 30, 2014 4:18 pm
Forum: General Scirocco Chat
Topic: Introduce yourself
Replies: 1193
Views: 345902

Re: Introduce yourself

Hello all 'rocco lovers, my name is Scott from Jersey in the channel islands, I bought my 88 GTX (or the black wedge as she is known to my mates) back in 2008 for 500 quid and she is still going strong. I have had about 10 cars since I started driving but the rocco is by far my favourite one, she is ...