wash, wax, polish, products, methods, fine fettling
celyth
Posts: 44 Joined: Sat Apr 25, 2009 10:59 pm
fill in the right answer: 10
Location: caernarfon, north wales
Post
by celyth » Sun Apr 17, 2011 2:15 pm
hey all, the show season is starting and i need to get the gtx lookin its best :), need some advice on getting the exterior trim looking good, dont fancy using back to black or any greasy stuff as it looks horrible, was thinking maybe resparying them all satin black????
any easier method than this without having that horrible shiny look to it??
cheers
cel
steve
Posts: 112 Joined: Thu Jun 24, 2010 5:49 pm
fill in the right answer: 10
Location: Derby
Post
by steve » Sun Apr 17, 2011 6:14 pm
Not sure what a valetter would think, but I normally recolour stuff like that by degreasing it and spraying it with a vinyl dye.
"I'd get it one peice at a time and it wouldn't cost me a dime
You'll know it's me when I come through your town"
duncancallum
Posts: 85 Joined: Sun May 09, 2010 3:42 pm
fill in the right answer: 10
Location: Horwich
Post
by duncancallum » Sun Apr 17, 2011 9:36 pm
hot air gun.
I got told it by my valeter mate. Tried it on a terrano and its worked a treat. just hold it 10CM away and go easy it should start to blacken up.
wasted
Posts: 490 Joined: Wed Apr 01, 2009 11:29 am
fill in the right answer: 10
Location: Bristol
Post
by wasted » Mon Apr 18, 2011 1:30 pm
Meguiars Gold Trim Detailer. Doesn't come up gloss, but does come up lovely and black on everything I've tried it on. Gives a kind of deep satiny finish really - looks quite good.
'89 Scala 1.8i - Daily drive, Work in progress!
jeebz
Posts: 43 Joined: Sun Apr 17, 2011 3:45 pm
fill in the right answer: 10
Post
by jeebz » Mon Apr 18, 2011 8:19 pm
heat gun is the best im my opinion, its quite easy but you just have to go easy on it. however i have been advised that the Autoglym bumper care is also pretty good.
jeebz
Posts: 43 Joined: Sun Apr 17, 2011 3:45 pm
fill in the right answer: 10
Post
by jeebz » Mon Apr 18, 2011 8:25 pm
how easy was it to get rid of the plastic strip halfway up the door by the way?
celyth
Posts: 44 Joined: Sat Apr 25, 2009 10:59 pm
fill in the right answer: 10
Location: caernarfon, north wales
Post
by celyth » Wed Apr 20, 2011 5:46 pm
cheers for the info :) will try some products 1st i think, they havent gone grey but dont look as good as they should
never had a strip on the door, as far as i know, didnt have it when i bought the car anyways :)
dozzum
Posts: 670 Joined: Tue May 26, 2009 11:29 pm
fill in the right answer: 10
Location: Benson, Oxfordshire
Post
by dozzum » Thu Apr 21, 2011 8:08 pm
bought some forever black.
Will try and remember to take some before and after photos when i get round to doing it.
Should work as the picture they use for their advert is an old Jetta.
celyth
Posts: 44 Joined: Sat Apr 25, 2009 10:59 pm
fill in the right answer: 10
Location: caernarfon, north wales
Post
by celyth » Wed Apr 27, 2011 10:45 pm
did u get some befare and after pics??
dozzum
Posts: 670 Joined: Tue May 26, 2009 11:29 pm
fill in the right answer: 10
Location: Benson, Oxfordshire
Post
by dozzum » Fri Apr 29, 2011 9:04 am
No sorry got a bit carried away. but it does look really good, came up really black. I havnt got a bodykit though so not sure how it would work on that.
Ill let you know how it lasts.
dozzum
Posts: 670 Joined: Tue May 26, 2009 11:29 pm
fill in the right answer: 10
Location: Benson, Oxfordshire
Post
by dozzum » Fri Apr 29, 2011 9:08 am
Did you still want that stereo?