Heat-shield is gonna be ripped off!!!!!

Discussion relating to the Scirocco 1982-1991 - - please ask technical questions in the technical/trouble shooting section
Post Reply
User avatar
vwjohn81
Posts: 24
Joined: Sat Nov 21, 2009 9:06 pm
fill in the right answer: 10
Location: Newark, Nottinghamshire

Heat-shield is gonna be ripped off!!!!!

Post by vwjohn81 »

I keep getting a rattle underneath the car when decelerating from highspeed or going around corners :(

I have narrowed it down to the centre heat-shield near the handbrake cables and my exhaust sitting off centre so it hits one side of the shield..... have made attempts at moving the exhaust which moves back over time, tried moving the heat shield up which it only moves a nats thumb so it aint dropped that much.

I am seriously thinking of just ripping the heatshield off because its getting on my nerves that much!!

Anyone know if this will cause a problem with heating of the handbrake cables/unside of car??

Or have you had this problem and solved it via another way??


Nate
Posts: 4045
Joined: Thu Apr 02, 2009 10:37 pm
fill in the right answer: 10
Location: Cirencester / Swindon

Re: Heat-shield is gonna be ripped off!!!!!

Post by Nate »

you may be able to bend the heat shield slightly to move it away. you could also try loosening the joints in the exhaust so it hangs slightly better. if the exhaust is moving excessively, you may find you have an engine mount or two going soft, or that fitting some stiffer exhaust mounts might help. it could also be the shield has corroded around one of the mountings so it has dropped down over the bolt. take the bolt out and fit a penny washer before refitting

or just turn the stereo up ;)


Image

Check out my photostream on Flickr
'69 bay, '79 bay, '74 bug, '78 GLS, '91 GT2, '10 SAAB 9-3
User avatar
vwjohn81
Posts: 24
Joined: Sat Nov 21, 2009 9:06 pm
fill in the right answer: 10
Location: Newark, Nottinghamshire

Re: Heat-shield is gonna be ripped off!!!!!

Post by vwjohn81 »

Thanks for the reply..... there is no bolt holding it up, but you can't push it up much more than it is already so dont thing that will help.


Its pretty bent out of shape, so was thinking of taking it off the car and sorting it out once and for all..... I presume as it has no bolt - ya just unclip the mounts from the handbrake cables and then slide it out??


Boumsong
Posts: 283
Joined: Sat Apr 11, 2009 2:38 am
fill in the right answer: 10
Location: Loughborough

Re: Heat-shield is gonna be ripped off!!!!!

Post by Boumsong »

I've never ran heat sheilding under the car..casues to much trouble. Whip it off!


2k Painter and Powdercoater
User avatar
vwjohn81
Posts: 24
Joined: Sat Nov 21, 2009 9:06 pm
fill in the right answer: 10
Location: Newark, Nottinghamshire

Re: Heat-shield is gonna be ripped off!!!!!

Post by vwjohn81 »

hahahaha :hugegrin: :hugegrin: :hugegrin:

That's the answer I was looking for!! and prob end up doing that if it wont pack up once I had a go at reshaping it.


Boumsong
Posts: 283
Joined: Sat Apr 11, 2009 2:38 am
fill in the right answer: 10
Location: Loughborough

Re: Heat-shield is gonna be ripped off!!!!!

Post by Boumsong »

Save yourself the hassle, just get rid! The worst thing that'll happen is the cab might be a tad warmer during these cold cold mornings.


2k Painter and Powdercoater
User avatar
vwjohn81
Posts: 24
Joined: Sat Nov 21, 2009 9:06 pm
fill in the right answer: 10
Location: Newark, Nottinghamshire

Re: Heat-shield is gonna be ripped off!!!!!

Post by vwjohn81 »

Thanks... think I will do that - will make me feel better lol


Post Reply