hello
Scala 1.8i 1990
jumps out of 5th gear at 80 and whines...all the others are fine.
what would be causing that..collapsed bearing ?
Forum Update: This forum is now a legacy platform with limited activity. We recommend joining our Facebook group for the latest discussions and updates. The forum will remain online and usable but it's classed as an archive.
Users are NOT sync'd between the website and the forum. This means you MUST create an account for both.
Users are NOT sync'd between the website and the forum. This means you MUST create an account for both.
whineing 5th
Forum rules
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
-
kevtherev
- Posts: 30
- Joined: Fri May 08, 2009 6:46 pm
- fill in the right answer: 10
- Location: Wolverhampton
whineing 5th
Scala 1.8i 1990
driven with pride
driven with pride
-
kevtherev
- Posts: 30
- Joined: Fri May 08, 2009 6:46 pm
- fill in the right answer: 10
- Location: Wolverhampton
Re: whineing 5th
OK thanks
is it worth replacing the worn parts or just get a used box..
if so which boxes are straight swaps
1.8i scala
is it worth replacing the worn parts or just get a used box..
if so which boxes are straight swaps
1.8i scala
Scala 1.8i 1990
driven with pride
driven with pride
Re: whineing 5th
Id go for another box, pref one with less miles.
Have a look at the gearbox code, stamped underneth gearbox where it meets the engine. There is a smooth bit of alloy there with the code.
Then use the "gearbox code's" found at the top of this page to find a match..
Have a look at the gearbox code, stamped underneth gearbox where it meets the engine. There is a smooth bit of alloy there with the code.
Then use the "gearbox code's" found at the top of this page to find a match..

