Just noticed oil leak started this week, from nothing to quite a few drips.
Easy to locate its weeping from the contact on the oil pressure sender on the right (viewed from front) of cylinder head.
Unless ive read things wrong, its the low pressure one I need 0.15 - 0.45 bar ?
But the reason for the thread, is this common? is it a sign of another problem, high pressure/ breather blockage etc??
Looked in pipes out from rocker cover to air intake, they have a nasty off white mayonnaise stuff in there, but not blocked..
Thanks
Chris.
oil from pressure sender, mk2
Forum rules
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
-
chrisdevon
- Posts: 54
- Joined: Sat Feb 20, 2016 2:20 pm
- fill in the right answer: 15
- Location: Exeter
- james butler
- Posts: 3004
- Joined: Fri Apr 24, 2009 1:54 pm
- fill in the right answer: 10
- Location: birmingham
Re: oil from pressure sender, mk2
yes its quite common
my last sensor failed and leaked like this, cant remember which came first whether it leaked or failed but one thing led to the other.
its getting colder now so your going to get condensation in the engine breathers leading to the mayonnaise stuff.
take the car for a good long blast, get it nice and hot then see if there`s any in there.
by chance are you using castrol oil?
my last sensor failed and leaked like this, cant remember which came first whether it leaked or failed but one thing led to the other.
its getting colder now so your going to get condensation in the engine breathers leading to the mayonnaise stuff.
take the car for a good long blast, get it nice and hot then see if there`s any in there.
by chance are you using castrol oil?
I dont mind project cars but I HATE SANDING!!!
- unknownmale
- Posts: 991
- Joined: Tue Jul 23, 2013 2:34 pm
- fill in the right answer: 15
- Location: London
-
steve bain
- Posts: 630
- Joined: Wed Apr 15, 2009 11:01 am
-
chrisdevon
- Posts: 54
- Joined: Sat Feb 20, 2016 2:20 pm
- fill in the right answer: 15
- Location: Exeter
Re: oil from pressure sender, mk2
thanks guys, swapped it over after work my local car place had one in stock..
all in working and not leaking.
thanks for mayonnaise comment, will try that. not sure which oil, bought car in March, will change oil soon.
all in working and not leaking.
thanks for mayonnaise comment, will try that. not sure which oil, bought car in March, will change oil soon.

