A few bolt numbers if you please

[andyneedham2]

Hi Guys,

I'm in the process of converting my GT2 to an ABF and I'm in need of some bolt numbers if anyone can help...? I'm a bit stuck however, as I'm unable to see either engine!

I need part numbers for:
- the bolts that hold on the engine mount (drivers side) to the block, they should be 4x hex bolts
- the engine mount (drivers side) bolt
- the bolts that hold the gearbox to the block, poss one or two through the starter motor??
- bolts for the front and rear engine mounts

As I mentioned, I am unable to see either engine at the moment so if anyone is able to take pics of these ares that would be very much appreciated.

Many thanks in advance,

Andy

[Blueshark]

I need part numbers for:
- the bolts that hold on the engine mount (drivers side) to the block, they should be 4x hex bolts
N 014 709 1 4x

- the engine mount (drivers side) bolt
N 010 472 11 1x

- the bolts that hold the gearbox to the block,
N 019 524 1 2x
N 902 992 01 1x

poss one or two through the starter motor??
N 044 760 1
N 044 742 1 1x each

- bolts for the front and
N 010 254 14 2x

rear engine mounts
Has no bolts just 3 M10 and 2 M12 nuts.

Greets, Joost

[andyneedham2]

Posted this a good while ago, sorry for the slow reply. Thanks very much Joost!

Andy

[Blueshark]

Posted this a good while ago, sorry for the slow reply. Thanks very much Joost!

Andy

You are welcome, does it al fit and is it in place now?.

[andyneedham2]

Wow, been away from the forum for a while now. Things have slowed down on the car front recently, mainly due to having a house, weather and a garage that is too small meaning that I can't have all parts present. So I have to collate the parts and then get the engine dropped in all in 1 go!

Got a friend booked to do some welding and I'll be dropping the block on soon! I really must start a thread to make myself progress with the build!

Andy