zender z400 20vt project! UPDATED 29/1/14

[GTXTRA]

looking good there sire.

[lancekeatley]

Not been on here for a while guys, been cracking on with the conversion... here are two photos of how it stands at the mo.

Its a k04 turbo with lightened flywheel and lightened ecs pulleys... and lots of custom goodies :)... should be hitting 270hp.

[Roxylife]

Loving it,

With your top fill rad, did you just blank off the header tank feed pipe? The one with the y piece to the turbo water feed?

Also how did you go about your main fuel lines?

More pics!!

[lancekeatley]

I blanked it off at the y piece and connected the turbo water feed to the outlet closest to the thermostat. And i am running a swirl pot with a custom fuel pump set up... With AN-6 braided fuel lines under the car to the fuel rail.

[scratchfree]

Like this one alot... Good Work

[Roxylife]

Where should this blanked off nipple go normally!?

[lancekeatley]

To the header tank i believe :)

[isaidthephil]

Looking forward to watching the progress on this motor :) thinking about doing a 1.8t conversion on mine late next year.

[lancekeatley]

:)... 1.8t gives the old roccos a new lease of life. Plus they can then toy with m3s and the like :p.

[Dutch GT]

Does that mean its done? Let's have a look then!

[lancekeatley]

Not done yet... wont be on the road untill atleast summer time. ... but 270bhp into 1000kgs... is deffo going to be a handfull of hot fuzzy delight :).

[Bill]

Superb work, going to be a monster

[8816vhawaii]

very nice work zender z400 very cool

[dingorocco]

Not done yet... wont be on the road untill atleast summer time. ... but 270bhp into 1000kgs... is deffo going to be a handfull of hot fuzzy delight :).

Uh oh, I can see messy trousers ......................

[vwglasgow]

Sweeeeeeet