Page 1 of 1
Picture of the near side under dash tray in place.
Posted: Tue Jun 15, 2010 7:36 pm
by markh
As title please, i have a tray to replace the missing one, but for the life of me cant see how its supposed to fit !!
Maybe theres different kinds of tray , or im missing another piece ?
Cheers in advance chaps.
Re: Picture of the near side under dash tray in place.
Posted: Wed Jun 16, 2010 9:00 am
by Ryan
Probably won't help too much - but it's the best I could find....
Re: Picture of the near side under dash tray in place.
Posted: Wed Jun 16, 2010 10:14 am
by The Autoad
one screw front left of the tray into captive hole in the A pillar region, one screw on the front right into a black metal bracket and one (maybe two if i recall) through the sticky-out bracket on the back of the shelf into a hole in the firewall.
Re: Picture of the near side under dash tray in place.
Posted: Wed Jun 16, 2010 1:00 pm
by 1lazza
Top RHS goes into a bracket off a piece of trim which covers the end of the heater matrix. Often missing or bracket broken off...this is probably the area of confusion.
Re: Picture of the near side under dash tray in place.
Posted: Wed Jun 16, 2010 5:46 pm
by markh
Cheers guys, it makes a bit more sense now, i must be missing the bracket at the matrix end then.
Re: Picture of the near side under dash tray in place.
Posted: Sun Jul 04, 2010 11:56 pm
by WayneMK1
Just putting mine back together and it looks like this - if this is of any help!
Wayne