Scirocco Register

Come on then, what's the trick?

I have a 70Amp alternator that I need to get the pulley off to strip the alternator down (to clean and paint) but HTF do you get the pulley bolt undone?

You'll be wanting a bearing puller!

Ok, so another way...

support the pully on some metal, alowing the alternator to dangle beneith, free (but making sure it has a soft landing!

put a longer bolt in the place where you took the single bolt out of.

hit bolt.

(sorry not got one infront of me so can't see exactly what to do, but thats the genral idea!)


Jay.

violence and lots of it. condsider using fire

I gotta get the Nut off first, lol... oh, and now been on ebay.de and ordered some Brimstone, unfortunately the UK ebay can't allow it to be listed. Should sort it

sorry, just re-read your first post!

jam the wheel some how (a belt round it, a filter rachet, a couple of chisles?)


Jay.

has it got a hex on the centre shaft you can either stick an allen key in or grab with a spanner?

It's a multisplined star drive... more than the normal 6 spokes.

I may just jam the wheel in the vice and rag heck out of hte nut. If the wheels that seized onto the shaft then that should do the trick. THEN attack attack attack!!

Funky Diver wrote:It's a multisplined star drive

http://cgi.ebay.co.uk/40-PCE-TORX-STAR- ... 4512wt_962

a set like that should sort it