I used to put stands on the wishbone area, but the car is so low these days its a bit dangerous jacking the car up to get to the required height
Cheers guys
Alex
Stupid Question Alert....
Forum rules
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
-
Risocco
- Posts: 1374
- Joined: Wed Apr 01, 2009 1:09 am
- fill in the right answer: 10
- Location: Costa-Del-Kidderminster
Stupid Question Alert....
OK, I've seen a few of you guys using Axel Stands on the sills at the front and rear with a block of wood between chassis and stand. Where exactlly do you guys put them?
I used to put stands on the wishbone area, but the car is so low these days its a bit dangerous jacking the car up to get to the required height
Cheers guys
Alex
I used to put stands on the wishbone area, but the car is so low these days its a bit dangerous jacking the car up to get to the required height
Cheers guys
Alex
1983 GL
1986 GT
1994 Corrado VR6
1986 GT
1994 Corrado VR6
-
dozzum
- Posts: 670
- Joined: Tue May 26, 2009 11:29 pm
- fill in the right answer: 10
- Location: Benson, Oxfordshire
Re: Stupid Question Alert....
at the front i usaully put it just inside of the jacking point on the sill where theres a circle shape. its nice n strong there.
At the rear i stand them either side where the back axle joins.
hope that makes sense
Rich
At the rear i stand them either side where the back axle joins.
hope that makes sense
Rich