Been trying to hunt down a rear right (facing back of car) black light housing. Finally found a potential light thanks to Blueshark, however the light is the EU (not uk) variant so the fog light spot is covered up.
Can I just follow the first bit of this guide (noting that the lights are in a different order on EU lights)?
http://www.scirocco.org/tech/mk2/rearfog/
(drill out the Fog cover)
Any way to make a reflector plate?
Can anyone see any potential problems?
Cheers
Non-UK rear light (fog light woes)
Forum rules
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
-
teenspirit7
- Posts: 43
- Joined: Thu Oct 22, 2015 11:38 am
- fill in the right answer: 15
- Location: Sussex
-
james butler
- Posts: 2995
- Joined: Fri Apr 24, 2009 1:54 pm
- fill in the right answer: 10
- Location: birmingham
Re: Non-UK rear light (fog light woes)
i never bothered with a relfector plate as i thought all lights have them.
but yes i drilled out my fog lamp blank and inserted another bulb so i have left and right rear fog lights.
but yes i drilled out my fog lamp blank and inserted another bulb so i have left and right rear fog lights.
I dont mind project cars but I HATE SANDING!!!