Scirocco Register

Posted: **Thu Jan 31, 2013 7:13 pm**

Progress is slow... too many other projects on...

Stripping discs on a grinder (the plastic mesh type ones) seem to be the best way to get the residue off after scraping... Found a few pin-holes but overall the floor looks very good for 36 years old. Rollover jig bought from BonusRocco is coming in very handy.

Posted: **Sun Feb 03, 2013 4:19 pm**

*Cough* . Exposed steel on a MK 1 over any period of time, especially the lower bit. Very brave

Posted: **Sun Feb 03, 2013 7:56 pm**

Looking good Mike. Nothing like getting covered in a blizzard of fluffy underseal!

Very impressed with the panel beater's results, must have been fascinating to watch such skill.

Scirocco Register

Mk1 Classic Touring Car - Bodyshell Prep and 'Bottom Scraping'

Re: Mk1 Classic Touring Car - Bodyshell Prep and 'Bottom Scraping'

Re: Mk1 Classic Touring Car - Bodyshell Prep and 'Bottom Scraping'

Re: Mk1 Classic Touring Car - Bodyshell Prep and 'Bottom Scraping'