Forum Update: This forum is now a legacy platform with limited activity. We recommend joining our Facebook group for the latest discussions and updates. The forum will remain online and usable but it's classed as an archive.

Users are NOT sync'd between the website and the forum. This means you MUST create an account for both.

mk1 gear leave gaitor - frame dimensions

Bodyshell and Panels; Fittings; Dashboards; Interiors; Bumpers; Light clusters front and rear (non electrical queries) Grilles and brightwork; Repairs including to bulkhead due to clutch cable pulling through
Forum rules
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
Post Reply
GTXTRA
Posts: 3392
Joined: Mon Mar 02, 2009 9:38 pm
fill in the right answer: 10
Location: London

mk1 gear leave gaitor - frame dimensions

Post by GTXTRA »

Hi,

odd one perhaps but if anybody has access to a frame that the gear lever gaitor fits around please can they stick up the measurements?

i've bought two off ebay but they are too small for the mk2 gaitor frame, they are same size as mk1 golf.

before i send both back i'd like to see if one of them fits the mk1 scirocco gaitor frame.

cheers in advance.
Serial Rocco-ist.........
Top
mr.brown
Posts: 1489
Joined: Thu Apr 02, 2009 10:13 pm
fill in the right answer: 15
Location: Surrey

Re: mk1 gear leave gaitor - frame dimensions

Post by mr.brown »

These are measurements with the gaiter still on. As you know the shape is a trapezoid but with the corners rounded off - this makes an accurate measurement difficult. So, approximately, it's 105mm x 105mm x 104mm x 107mm. HTH
Top
Post Reply

Return to “Bodywork, Trim and Paint”