Forum Update: This forum is now a legacy platform with limited activity. We recommend joining our Facebook group for the latest discussions and updates. The forum will remain online and usable but it's classed as an archive.

Users are NOT sync'd between the website and the forum. This means you MUST create an account for both.

gearbox prob

Suspension; Gearbox, Clutch and Driveshafts; Brakes; Steering; Throttle and clutch cable issues
Forum rules
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
Post Reply
kchris
Posts: 1
Joined: Sun Apr 08, 2012 12:36 pm
fill in the right answer: 15

gearbox prob

Post by kchris »

hi could anyone help ive lost 1st and 2nd and reverse gears any ideas ? i thought maybe gear linkage replacement or gear selector ? any other ideas please
User avatar
wasted
Posts: 490
Joined: Wed Apr 01, 2009 11:29 am
fill in the right answer: 10
Location: Bristol

Re: gearbox prob

Post by wasted »

Could be the long shaft that connects the bottom of the gearstick to the linkage; if that's become loose and has twisted out of alignment, it could be causing the problem you describe. Best to get under there and check it over.
'89 Scala 1.8i - Daily drive, Work in progress!
User avatar
Mr Funk
Posts: 2135
Joined: Wed Apr 01, 2009 6:39 pm

Re: gearbox prob

Post by Mr Funk »

I had a similar problem over the weekend. Turned out to be that the engine and gearbox retaining bolts had come lose.

Which was nice.
Head of Complaints - Big Pie Cartel
If it sounds like it's naughty, it probably is.
Village Idiots
Posts: 540
Joined: Wed Apr 08, 2009 9:33 am
fill in the right answer: 10
Location: Ribble Valley, Lancashire

Re: gearbox prob

Post by Village Idiots »

I suspect the short link on top of the gearbox which transfers side to side movement from the gear lever to movement to the internal selector mechanism. If you get someone to move the gear lever side to side you will be able to see if it is actuating anything on top of the gearbox. This link may be still attached at one end, if so pop back on. However it may have vanished completely. In either case replace it, it has nylon (I think) bushes at the ends, these wear allowing it to come off. Once it has happened it will do so again.
Post Reply