Removing Cold Start?

For all Carb and Injection engines, standard or modified plus non-standard engine transplants. Heads; Blocks; Cooling (including heater issues related to the cooling system); Mounts etc
Forum rules
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
Post Reply
User avatar
T0M
Posts: 49
Joined: Sat Jan 09, 2010 7:06 pm
fill in the right answer: 10
Location: Chichester

Removing Cold Start?

Post by T0M »

The cold start on my 1.8 DX is playing up. was wondering if there were any significant side effects of removing
the cold start injector and all the wiring and blocking the hole with a blanking plate (other than needing some throttle on a cold morning to start).
i have driven the car with it unplugged and it was fine. However i have heard talk of the 5th injector being used to adjust the mixture, i which case its probably better off fixing it over deleting it. cheers, Tom


88' Scirocco GTX
92' Polo G40
PeteGLi
Posts: 918
Joined: Thu Mar 05, 2009 8:37 pm
fill in the right answer: 10
Location: Essex

Re: Removing Cold Start?

Post by PeteGLi »

The cold start injector does what it says on the tin - it operates for a period of approximately 8 to 10 seconds on cranking a cold engine.

It has no effect once the engine is warm.

For an overview of the K-jet system see here - http://www.diagnostic-assistance.co.uk/mech_inj.htm#top


User avatar
T0M
Posts: 49
Joined: Sat Jan 09, 2010 7:06 pm
fill in the right answer: 10
Location: Chichester

Re: Removing Cold Start?

Post by T0M »

ah thanks mate. that website appears to be wealthy with useful info :good:

so yeah, im pulling the B**tard out


88' Scirocco GTX
92' Polo G40
Post Reply