also am i right in thinking that the fittings are m10 x 1??????? or am i way out?
thanks in advance liam
brake lines
Forum rules
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
brake lines
im renewing all my brake system and looking to replace majority of the brake lines, but just wondering if anyone could tell me what thickness brake lines i need to but as dont want to look a fool when go into local autofactors
also am i right in thinking that the fittings are m10 x 1??????? or am i way out?
thanks in advance liam
also am i right in thinking that the fittings are m10 x 1??????? or am i way out?
thanks in advance liam
-
Nate
- Posts: 4045
- Joined: Thu Apr 02, 2009 10:37 pm
- fill in the right answer: 10
- Location: Cirencester / Swindon
Re: brake lines
wasn't aware of there being more than 1 size of brake pipe. you can get different metals though - copper of kunifer (copper nickel mix) and opinion is divided which is best.
iirc these are the nuts you want
iirc these are the nuts you want
Re: brake lines
Nate wrote:wasn't aware of there being more than 1 size of brake pipe. you can get different metals though - copper of kunifer (copper nickel mix) and opinion is divided which is best.
iirc these are the nuts you want
But you need more than 10 nuts if you are replacing all of them - I think you need 12 all in if you are retaining the factory pipe set up.And the brake pipe is 3/16th as referred to in the above link.