Selecting reverse blows fuse, then engine wont re-start

For all electrical questions; Alternators including fitment; Light connections/wiring; Instruments; Gauges; MFA; Heater blower (not coolant related) issues etc etc.
Forum rules
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
Post Reply
Peaceman
Posts: 66
Joined: Thu Nov 05, 2009 10:49 pm

Selecting reverse blows fuse, then engine wont re-start

Post by Peaceman »

Bit of an odd one this and I only just kept my eyes open using the search function to find no other similar problem.

Any time I select reverse it blows number 15 (reverse light switch) then if i switch off the engine say to park up, it wont re-start unless the fuse is replaced....How weird!

Anyway, I disconnected the reverse light switch and it stopped the fuse blowing like you'd expect so that needs replacing first.

Just seems strange it wouldn't re-start??? :dunno:


bensspares
Posts: 479
Joined: Fri Jul 16, 2010 7:43 pm
fill in the right answer: 10
Location: leicestershire

Re: Selecting reverse blows fuse, then engine wont re-start

Post by bensspares »

First check the rear clusters, you are looking for corrosion and a possible short.

this is a dx engine


If it is not broken, Do not fix it !!!
Peaceman
Posts: 66
Joined: Thu Nov 05, 2009 10:49 pm

Re: Selecting reverse blows fuse, then engine wont re-start

Post by Peaceman »

Yeah DX..

Ok, cheers will have a look later


Post Reply