Hi
A friends Rocco is over-running (dieselling), keeping running for a few moments after the ignition is switched off. It's also idling high when started from cold, and still runs fast when warm, but if he stops the engine and re-starts it, it runs fine. There is a smell of fuel, as if it's over-fuelling.
I was told it could be the coolant temperature sender at fault. I changed the Waxstat, just in case, but that didn't fix it.
Any ideas?
Thanx
Phil
Possible faulty coolant sensor?
Forum rules
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
-
mark1gls
- Posts: 3957
- Joined: Thu Apr 02, 2009 9:28 pm
- fill in the right answer: 10
- Location: Somerset
Re: Possible faulty coolant sensor?
Have you checked the timing, Can cause the running on.
Mk1 78 Scirocco GLS 1.6 FR, weekend toy.
Mk1 88 Golf GTi cabriolet 1.8 DX. Daily drive.
Membership No. 323
Mk1 88 Golf GTi cabriolet 1.8 DX. Daily drive.
Membership No. 323
Re: Possible faulty coolant sensor?
yeah, when it first started happening, I thought it maybe worth just adjusting the carb, but it only seems to play up when the engine is cold.
It idles fast on startup, then still does it when the engine is warm. However, if we stop the engine and re-start it, it seems to idle ok, but still over-runs.
It idles fast on startup, then still does it when the engine is warm. However, if we stop the engine and re-start it, it seems to idle ok, but still over-runs.
Re: Possible faulty coolant sensor?
Anyone know exactly where the coolant temperature sender is on an EX engine? I'm gonna bite the bullet and change it anyway.
I've got a Haynes manual, but its not being very helpful as to where exactly it is.
I've got a Haynes manual, but its not being very helpful as to where exactly it is.
