Forum Update: This forum is now a legacy platform with limited activity. We recommend joining our Facebook group for the latest discussions and updates. The forum will remain online and usable but it's classed as an archive.
Users are NOT sync'd between the website and the forum. This means you MUST create an account for both.
Users are NOT sync'd between the website and the forum. This means you MUST create an account for both.
Shall I get these shocks? Pros and cons? Poly bump stops?
Forum rules
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
- Junglist
- Posts: 555
- Joined: Wed Apr 01, 2009 7:06 pm
- fill in the right answer: 10
- Location: MANCHESTER
Shall I get these shocks? Pros and cons? Poly bump stops?
http://cgi.ebay.co.uk/VW-GOLF-1-SPORT-S ... 518e9a9a67
Tight budget. Was hoping not to replace the shocks but after almost 160,000 miles it seems foolish to do the bushes and springs but leave the shocks. I am however on a tight budget and am already looking at £200 for bushes, springs and labour costs. I'm doing poly rear http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... K:MEWAX:IT , new rubber on the front, GTX 25mm lowers on the back, GMAX 40mm lowers on the front. I also think I ought to buy new bump stops and top mounts. Do I go poly? http://cgi.ebay.co.uk/Golf-1-Golf-2-Gol ... 19b1392a8b This is getting out of hand cost-wise! Any advice?
MINEFIELD!!! Aaaaaagh! My car cost less than the suspension's about to!
Tight budget. Was hoping not to replace the shocks but after almost 160,000 miles it seems foolish to do the bushes and springs but leave the shocks. I am however on a tight budget and am already looking at £200 for bushes, springs and labour costs. I'm doing poly rear http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... K:MEWAX:IT , new rubber on the front, GTX 25mm lowers on the back, GMAX 40mm lowers on the front. I also think I ought to buy new bump stops and top mounts. Do I go poly? http://cgi.ebay.co.uk/Golf-1-Golf-2-Gol ... 19b1392a8b This is getting out of hand cost-wise! Any advice?
MINEFIELD!!! Aaaaaagh! My car cost less than the suspension's about to!
Tornado GTII: Koni, Flo-flex, Girling, Weber, K&N, Powerflow, Goodridge, ASA, Yokohama... to fit: stainless 4 branch.




-
Nate
- Posts: 4045
- Joined: Thu Apr 02, 2009 10:37 pm
- fill in the right answer: 10
- Location: Cirencester / Swindon
Re: Shall I get these shocks? Pros and cons? Poly bump stops?
in the past i've just shortened the rubber ones to suit the shorter shock. i'd imagine that the poly bump stops may may the suspension bottoming out much more severe
Re: Shall I get these shocks? Pros and cons? Poly bump stops?
I was looking at these make shocks for the A6 and found the English translation quite amusing 'BAD GRIP - PERFORMANCE GERMANY'
Bad Grip sports shocks anyone?
I wonder if they make tyres too
Bad Grip sports shocks anyone?
I wonder if they make tyres too

- Junglist
- Posts: 555
- Joined: Wed Apr 01, 2009 7:06 pm
- fill in the right answer: 10
- Location: MANCHESTER
Re: Shall I get these shocks? Pros and cons? Poly bump stops?
Yeah, I was laughing about that! So anyway, these are cheaper than the boge ones from GSF (which I'm told are cheap) once you buy a full set. Is that because they're crap? TUV approved suggests not, as does German made, as does the fact that they're gas, not oil (isn't that better?). So shall I get them? I might have to wait another month til next payday to afford the fitting labour if I buy them rather than using old ones.
Tornado GTII: Koni, Flo-flex, Girling, Weber, K&N, Powerflow, Goodridge, ASA, Yokohama... to fit: stainless 4 branch.




Re: Shall I get these shocks? Pros and cons? Poly bump stops?
They are cheap, but cheap. Boge ones from gsf are good quality and reasonable price. Euro also do bilsteins for same price as boges, better still

- Junglist
- Posts: 555
- Joined: Wed Apr 01, 2009 7:06 pm
- fill in the right answer: 10
- Location: MANCHESTER
Re: Shall I get these shocks? Pros and cons? Poly bump stops?
So i should get a set of bilsteins from euro car parts then? How much are we talking roughly? Once i pay the postage on the ones in the link, they're close to £100 so if the bilsteins are around that sort of money, i'll go with them rather than risk some i've no idea of the quality of, even if they are TUV approved!
Tornado GTII: Koni, Flo-flex, Girling, Weber, K&N, Powerflow, Goodridge, ASA, Yokohama... to fit: stainless 4 branch.




-
ianaudia4
- Posts: 3800
- Joined: Wed Apr 01, 2009 4:35 pm
- fill in the right answer: 15
- Location: Central London and Essex
Re: Shall I get these shocks? Pros and cons? Poly bump stops?
I have just put Boge gas shocks on the Scala, they are fine. Boge are made by Sachs, which as we all know make good quality products.
Kieran, don't forget you get a discount from GSF for being a paid up member.
Kieran, don't forget you get a discount from GSF for being a paid up member.
1984 MK2 Havanna brown Storm
1989 MK2 Alpine white Scala injection
2006 Audi A4 3.0TDI quattro (the beast)
1989 MK2 Alpine white Scala injection
2006 Audi A4 3.0TDI quattro (the beast)
- Junglist
- Posts: 555
- Joined: Wed Apr 01, 2009 7:06 pm
- fill in the right answer: 10
- Location: MANCHESTER
Re: Shall I get these shocks? Pros and cons? Poly bump stops?
You can get a discount anyway! I reckon i could get one at euro too. I have heard more good reviews of bilstein than i have of boge but it depends on the price. Can i have a second opinion on which are better? And a rough price? Cheers.
Tornado GTII: Koni, Flo-flex, Girling, Weber, K&N, Powerflow, Goodridge, ASA, Yokohama... to fit: stainless 4 branch.




Re: Shall I get these shocks? Pros and cons? Poly bump stops?
Nothing wrong with Boge over standard. I have always thought of Bilstein as more of a sporty ride, but I guess they must do standard ride comfort too.
- Junglist
- Posts: 555
- Joined: Wed Apr 01, 2009 7:06 pm
- fill in the right answer: 10
- Location: MANCHESTER
Re: Shall I get these shocks? Pros and cons? Poly bump stops?
So is it fair to say the quality's the same but the bilstein ones are stiffer than the boge? And either option is an improvement on standard? Still could do with knowing which brand is cheaper.
Tornado GTII: Koni, Flo-flex, Girling, Weber, K&N, Powerflow, Goodridge, ASA, Yokohama... to fit: stainless 4 branch.




Re: Shall I get these shocks? Pros and cons? Poly bump stops?
http://www.eurocarparts.com/ecp/c/Volks ... -Absorbers
I think the prices are plus VAT
If you're on a budget I'd just get the cheapies off ebay. They come with a 2 year warranty don't they?
I think the prices are plus VAT
If you're on a budget I'd just get the cheapies off ebay. They come with a 2 year warranty don't they?

- Junglist
- Posts: 555
- Joined: Wed Apr 01, 2009 7:06 pm
- fill in the right answer: 10
- Location: MANCHESTER
Re: Shall I get these shocks? Pros and cons? Poly bump stops?
If they're plus VAT I'll be looking at over £150 for those won't i? What's the accessory kit? Any ideas? Starting to look like the ebay job's the one due to financial restrictions. I'm sure they'll last. Only worry is a horrible ride quality. I'm buying blind so to speak. Thanks for the help and links and stuff. I'm almost decided now.
Tornado GTII: Koni, Flo-flex, Girling, Weber, K&N, Powerflow, Goodridge, ASA, Yokohama... to fit: stainless 4 branch.





