16v wiring / head

[monzajake]

As im aware there is going to be a few 16v's being built i thought id stick this up as a sticky,for people to relate to wiring up the all important oil lights water sensors oil temps and the go go the ecu..
the yellow wire to the high pressure switch coloured white , and blue wire to the low pressure switch ,brown or black coloured



I will write up on how you get the feed to your ecu shortly.

[filmidget]

As on JBO's thread, I think that diagram is in error...

The oil temp sensor above the thermotime switch is actually coolant sensor (for 'missing' ISV feed*).

* Which you won't need if not using an ISV with the KE-jet setup.

[monzajake]

strange, it's oil on mine, as im not using the one on the back of the head,(see right of pic arrow)