A very productive day today
Filler primed and rubbed down the passenger side arch..
This showed up a few blemishes, so it was filler primered again and once again rubbed smooth, before being given a coat of grey primer. While this dried i gave the drivers side a few coats of colour.....
In between coats of primer and paint , i cracked on with some other jobs. Started to repair some damage to the front panel...
And a couple of small repairs to the drivers side front wing...
Then the front panel was given a few coats of black stonechip coating...
Next the repairs to the drivers wing were painted and stonechipped as required....
I also gave the bottom edges of each sill a couple of coats of stonechip to give them some protection through winter. I cleaned up and greased all the metal brake pipes, undersealed the inner arches, and also the welded repair to the drivers side chassis, fitted a new rear wiper blade and gave the metal fuel pipes another coat of underseal.
In between all these other jobs, i kept going back to applying mores coats of paint to the arches.
The drivers side rear arch with the masking removed, obviously it will need cutting once the paint has cured, but im very pleased with the finish...
And the passenger side, again it will need to be cut when properly dry.....
Just had time to change the radiator too, as it had sprung a leak, so changed the anti freeze at the same time. Not much more to do now before MOT, but still a few jobs to do once its on the road.
Thanks Ed, i'm getting quite good at arch repairs now, even if i do say so myself !!! 
