Lift pumps

Carbs; K-jet; Tanks; Lines; Filler necks, Senders; aftermarket fuel systems; Exhausts and Manifolds;air filters - standard and aftermarket
Forum rules
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
Post Reply
nordoff
Posts: 13
Joined: Thu Apr 23, 2009 6:21 pm

Lift pumps

Post by nordoff »

I'm searching for a lift pump for my rocco storm.
I'm after part numbers to tell the difference between ones for the 40litre storm fuel tank be the normal 55 litre tank.

I have the following manufacturers and parts numbers all refering to the same pump I believe to be correct.
Airtex E10241
bosch 0 580 453 012
vdo E22 057 012
pierburg 7.21088.62.0
vw 357 906 092C

for a vw or seat (possibly 92 toledo)
0.24bar pressure.

can anyone confirm any of that?


DannyH
Posts: 604
Joined: Wed Apr 01, 2009 11:21 am
fill in the right answer: 10
Location: Todmorden

Re: Lift pumps

Post by DannyH »

Where abouts are you cos i think i may have one

(seem to remember i paid £10 for it?)


Danny
nordoff
Posts: 13
Joined: Thu Apr 23, 2009 6:21 pm

Re: Lift pumps

Post by nordoff »

Stoke-on-trent.
I can happily send a cheque and add a fiver on for postage.
Pm me a name and address.


DannyH
Posts: 604
Joined: Wed Apr 01, 2009 11:21 am
fill in the right answer: 10
Location: Todmorden

Re: Lift pumps

Post by DannyH »

give me a part No. as i've got 2 and i'm pretty sure i was told one of them was an early one?

they look the same to me?? :blush:

i'll have a look see when i get a chance.


Danny
nordoff
Posts: 13
Joined: Thu Apr 23, 2009 6:21 pm

Re: Lift pumps

Post by nordoff »

It should be one of the part numbers in my first post.
The vw one is 357 906 092C


DannyH
Posts: 604
Joined: Wed Apr 01, 2009 11:21 am
fill in the right answer: 10
Location: Todmorden

Re: Lift pumps

Post by DannyH »

will have a look tomorrow and let you know


Danny
nordoff
Posts: 13
Joined: Thu Apr 23, 2009 6:21 pm

Re: Lift pumps

Post by nordoff »

I'll still take it but I may have found a uk supplier for anyone lese who has this problem.
http://partfinder.smpeurope.com/index.h ... alue=31513


DannyH
Posts: 604
Joined: Wed Apr 01, 2009 11:21 am
fill in the right answer: 10
Location: Todmorden

Re: Lift pumps

Post by DannyH »

Hi Nordoff

dug it out i'm presuming it's the smaller one 2 1/2"

the part No. on it is 533 906 092 (as far as i can see)

there's a chip on the filter so you would need to change it (i guess)

£10 posted if you still want it?

if you do i'll try and get it out to you tomorrow (you can post the cheque when you get it.)

bloody system keeps telling me i'm only allowed pics up to 600 pixels but they are smaller than that?? :ire: :ire: :ire: :ire: :ire:

here's links instead

http://i73.photobucket.com/albums/i219/ ... Car002.jpg

http://i73.photobucket.com/albums/i219/ ... r003-1.jpg

http://i73.photobucket.com/albums/i219/ ... Car004.jpg


Danny
nordoff
Posts: 13
Joined: Thu Apr 23, 2009 6:21 pm

Re: Lift pumps

Post by nordoff »

Yay. Pm me yer name and address, I can get a cheque written up today and franked in works post by 5pm.


DannyH
Posts: 604
Joined: Wed Apr 01, 2009 11:21 am
fill in the right answer: 10
Location: Todmorden

Re: Lift pumps

Post by DannyH »

posted 1st class this afternoon 2.20ish


Danny
Post Reply