https://scirocco-delen-eimers.nl/waterg ... 533819411/p in phcas wrote: Mon Jun 30, 2025 8:00 am Job done. Note to others. Getting the old blower out is mostly a destructive process as clips break on the old plastic and it is a bit of a faf rotating the blower around to get to each clip. Don't expect it to come out unscathed.
Split the new blower on the bench, put the motor bit in first, then the cover and clip them together.
The wiper arm is also troublesome getting it back with the blower due to the position of the blower below the bodywork hole. Patience and some brute force is will find it's way in.
On a separate note, the plastic scuttle tray /cover is fragile. I have one of the pattern ones that were on sale here a few years ago but heat and weather has made it brittle. Looks like I will be needing a new one again ..... soon!
New Heater Blower Fitting
Forum rules
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
-
Blueshark
- Posts: 1227
- Joined: Tue Apr 07, 2009 9:28 pm
- fill in the right answer: 10
- Location: Vleuten, The Netherlands
- Contact: