Was hoping someone had any information on high lift cams, a website or place I can get my hands on them for this engine?
Thanks
Hyde
1.8 8V EX engine High lift cams
Forum rules
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
-
mr.brown
- Posts: 1490
- Joined: Thu Apr 02, 2009 10:13 pm
- fill in the right answer: 15
- Location: Surrey
Re: 1.8 8V EX engine High lift cams
The usual suspects - Kent, Piper, Newman - all have various cams with varying profiles.
To get the most out of them you'll need your cylinder head reworked, inlet modified and a decent exhaust system. No to mention a Weber carb and someone to rejet and tune it all when done.
To get the most out of them you'll need your cylinder head reworked, inlet modified and a decent exhaust system. No to mention a Weber carb and someone to rejet and tune it all when done.
Re: 1.8 8V EX engine High lift cams
Ye all that sorted, have a new weber ready to go on and almost finished porting the cylinder head. Also almost finished making Hydraulic pipe bends to fabricate the exhaust manifold. Thanks for the info, much appreciated.
-
big_wig_074
- Posts: 135
- Joined: Wed May 13, 2015 8:08 am
- fill in the right answer: 15