Any experienced folk know where to obtain these parts?

[vpreynolds]

I'm just stuck looking for my last bits for resto completion.

Parcel shelf clip

ones that look like these. Hunted the net for ages and couldn't find them. any ideas?

Mirror glass
gain does replacement glass even exist?

Driver’s door, passenger door, wing all in tornado red.

Seat cloth and bolster for the gt2 tartan seats

thanks all.

[the edmundator]

The brass ones were specially made as a limited run. I can't remember who did it, but it wasn't a commercial venture.

[vpreynolds]

does anyone know who the maker was?

[MRMENDER]

They were done by someone in Germany or Holland. The person only did them as a limited production when he got enough orders. They are certainly not commonly avilable.
I think, but I'm not 100% sure, forum user name Tempest (Eric) had something to do with it as a go between

[jimmy h]

It was a a friend/ contact of Eric's

[Tempest]

Yes, they were made by a German chap called Günther aka Günni, who only would produce as many as he had pre-orders. He hasn't offered to make another few for a very long time. As a matter of cat he rarely appears on the German forum any more.

Tempest

[ghost123uk]

Re parcel shelf clips. A good while ago there was someone on here who came up with a nifty solution to this. They weren't brass of course. Now if only I could remember what it was! It might have been using the clips you find on many cars that hold the bonnet stay in place (when the bonnet is shut). Just a thought.

[MK21800]

Mirror glass
gain does replacement glass even exist?

You mean door mirrors? Sure, I got a replacement from ebay recently. It was very very slightly bigger than the original but works fine. About 8 quid.

[DannyH]

http://www.ebay.co.uk/itm/VW-GREY-HOOD- ... SweW5VQ2UB

you have to drill the hole out though

[Mr Funk]

Didn't someone 3d print them?

[jpr1977]

Re parcel shelf clips. A good while ago there was someone on here who came up with a nifty solution to this. They weren't brass of course. Now if only I could remember what it was! It might have been using the clips you find on many cars that hold the bonnet stay in place (when the bonnet is shut). Just a thought.

Ghost - Were you thinking of this one?

viewtopic.php?f=17&t=18898&p=136534&hil ... on#p136534

As for the mirror Glass I found the best solution I could find was to get 2hd mirror units with good glass and swap the mirror Glass over as it had all the plastic mounting unit, personally not a big fan of the stick on replacement type that goes over the old glass.

[james butler]

http://www.jetpress.com/Products.aspx/z ... ps-Single/

[alicarv96]

if there was a drawing for these brass parcel shelf clips i could try making some at work if there's interest in them.

[ghost123uk]

Re parcel shelf clips. A good while ago there was someone on here who came up with a nifty solution to this. They weren't brass of course. Now if only I could remember what it was! It might have been using the clips you find on many cars that hold the bonnet stay in place (when the bonnet is shut). Just a thought.

Ghost - Were you thinking of this one?
viewtopic.php?f=17&t=18898&p=136534&hil ... on#p136534

I don't think it was that particular thread, but the ones linked to by James Butler (above) look good.
Also, if you just put "bonnet stay clip" into Ebay, plenty of likely ones come up, also, not sure what size these are = http://www.ebay.co.uk/itm/Hyundai-Accen ... SwxcRW8sKv but maybe worth checking out.