Help required I am in the process of changing my dx engine over to a kr lump in my mk2 scirocco, but it has come to the time of wiring it all together, where do I start?
The dx loom has be swapped out for the kr loom I believe, but I have no idea where to start, the kr engine is in and the injection system has been removed as I am going down the carb route.
Any help would be appreciated.
Wiring looms
Forum rules
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
-
duggers
- Posts: 162
- Joined: Fri Apr 10, 2009 5:54 pm
- fill in the right answer: 10
- Location: Milton Keynes
Re: Wiring looms
Go Nodiz or Megasquirt if you want to be able to upgrade as you go along.
http://www.nodiz.co.uk/
http://www.nodiz.co.uk/
Apparently the dreadful paint on my Rocco is PATINA....
Membership # 432
Membership # 432
Re: Wiring looms
Was planning on using the kr loom for now untill I get it up and running, maybe when I havesaved a little more cash thats the way I could go.
even though the dx engine management has been removed there's still quite a lot of wires in the engine bay, can these also be removed.
even though the dx engine management has been removed there's still quite a lot of wires in the engine bay, can these also be removed.