parts for 2.0 16v 9A corrado engine

[mr alpine92]

$_57.JPG

Hi,
can some one help me give me some ide of what parts i am going to need to do my engine conversion,At the weekend i pick up a 2.0 16v 9A corr-ado engine block,The engine had new genuine hydraulic lifters along with a 1.8 KR intake camshaft,the engine was bear as you see in picture,so i going to be need some parts to get up and running in me scirocco,so far i was like to get some bits cheap,i am not sure what else i going to need so i add some pictures of what iv got so far,i no i need a throttle valve adapter; KR,and nuts and blots to put the inlet on,so if anyone could help me no what parts i am going to need,then i could go on the hunt for them,im not going to put the engine in but i just like to have the parts ready to fit,can i use the fly wheel of my scirocco engine as it a 1.8 dx engine and my 5 speed gearbox,all info welcome or even some in the London who would like to fit it would be welcome ,OK here some pictures of what iv got so far
chris

[mr alpine92]

heres some more pictures
chris

[DT1]

If you are interested I'm giving away a set of HT leads?

[mr alpine92]

If you are interested I'm giving away a set of HT leads?

thanks you but them parts i well be buy new for it,i mite need to get a new distributor,as i read some were the distributor hits the brake servo and i need to fit one off a golf mk3,this why i am asking here before buy parts so i get the right bits bro, chris

[mark1gls]

I've not done this conversion but there maybe some more info etc here.
http://vwgolfmk1.org.uk/index.php?page= ... misc&id=26

[mr alpine92]

I've not done this conversion but there maybe some more info etc here.
http://vwgolfmk1.org.uk/index.php?page= ... misc&id=26

thank mark bro,iv read this one before i got the wrong parts bro,know i no that the inlet bridge is for a golf and not going to work for me,so i am putting this job on the back boiler,till i can get the right parts for this job,
Chris

[Tim_R]

You might find it expensive to get a scirocco 16v inlet, more common in Europe and the US. You can use the golf inlet and have the metering head down by the driver's headlight. That I exactly what I did.

[mr alpine92]

You might find it expensive to get a scirocco 16v inlet, more common in Europe and the US. You can use the golf inlet and have the metering head down by the driver's headlight. That I exactly what I did.

do you have a picture off yours so i no what you mean,only thing iv seen that mite work is 16vg 60 manifold
on eBay,i do have some one looking for the bits i need,let hope they come thought and big thank for your info more is welcome chris

[Tim_R]

viewtopic.php?f=19&t=8746&start=45
Should be one in this thread, I can't link the photo on my phone. If you want any more I can grab them at the weekend.