just been out and had a grope (giggety) about inside the door. didn't find the captive nuts, but did find a load of non setting dinitrol. eww!
had a look at those rivnuts, i have a sneaky feeling we might have some in work. i'll have a butchers next week
mk1 mirrors
-
- Posts: 142
- Joined: Mon May 10, 2010 2:00 pm
Re: mk1 mirrors
You can buy a rubber rivnut that doesnt need a tool to fit them, take a look on ebay as i have seen them on there before
-
- Posts: 4045
- Joined: Thu Apr 02, 2009 10:37 pm
- fill in the right answer: 10
- Location: Cirencester / Swindon
Re: mk1 mirrors
I have a pair of mirrors.
Passenger i was going to fit but cant bring myself to cut the holes in the door, and a NOS VW drivers side, which i was going to fit in place of mine, but not sure I can be bothered stripping the door to fit a mirror that looks pretty much exactly the same :D
I have to check the drivers side as the adjuster seems stiff, as soon as i remember how to get the glass out! something with the holes in the bottom I think?
Passenger i was going to fit but cant bring myself to cut the holes in the door, and a NOS VW drivers side, which i was going to fit in place of mine, but not sure I can be bothered stripping the door to fit a mirror that looks pretty much exactly the same :D
I have to check the drivers side as the adjuster seems stiff, as soon as i remember how to get the glass out! something with the holes in the bottom I think?
- WayneMK1
- Posts: 168
- Joined: Mon Jun 22, 2009 8:11 pm
- fill in the right answer: 10
- Location: East Riding of Yorkshire
Re: mk1 mirrors
As you are probably aware there were two types of mirror fitted. The early 'flag' chrome and later the remote operated plastic type. The top edge of the doors must be angled differently on the Golf to the Scirocco as I discovered when trying to fit a replacement to my Storm! On the later (plastic) type, only on very close inspection is it evident that the shoulder on the mount is larger on the Golf (approx. 37mm to the Sciroccos 27mm) - it makes a difference!

This one is the Golf one I tried to fit. Now going on Ebay!

This one is the Golf one I tried to fit. Now going on Ebay!
History: 1983CL, 1984Gti, 1990Scala i, Corrado VR6, 1985 Storm, 1991 Scala i,1989 Scala i, Mk3 2.0GT TDI, Current: 1980 Mk1 Storm,
Re: mk1 mirrors
does anyone know how to get the mirro glass out?
Something isnt right inside my offside mirror as the up/down adjustment doesnt work. mirror moves but just springs back to face the floor...
I remember seeing something in the Bentley manual about the 2 holes in the bottom, but cant remember what
Something isnt right inside my offside mirror as the up/down adjustment doesnt work. mirror moves but just springs back to face the floor...
I remember seeing something in the Bentley manual about the 2 holes in the bottom, but cant remember what