Just recently the clutch has developed a kind of click/notch at the top of the clutch travel when releasing.
Bulkhead is fine, cable is good, no gears crunch and there are not visible obstructions.
I'm leaning towards the release bearing. Any ideas?
Notch/Click/Step in the clutch travel
Forum rules
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
-
Nate
- Posts: 4045
- Joined: Thu Apr 02, 2009 10:37 pm
- fill in the right answer: 10
- Location: Cirencester / Swindon
Re: Notch/Click/Step in the clutch travel
broken spring on the clutch plate, bearing, bulkhead, grit caught in the pedal pivot
-
james butler
- Posts: 2978
- Joined: Fri Apr 24, 2009 1:54 pm
- fill in the right answer: 10
- Location: birmingham
Re: Notch/Click/Step in the clutch travel
First thing I would do is take the clutch cable off the gearbox end and drip feed wd40 into the cable working the cable as you go. Put it back on the gearbox and try it. If this fixes the problem then replace the cable asap
I dont mind project cars but I HATE SANDING!!!