Mk1 distributor issue

For all Carb and Injection engines, standard or modified plus non-standard engine transplants. Heads; Blocks; Cooling (including heater issues related to the cooling system); Mounts etc
Forum rules
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
Post Reply
markchez
Posts: 62
Joined: Thu Jan 02, 2014 7:37 pm
fill in the right answer: 15

Re: Mk1 distributor issue

Post by markchez »

Hi

So this has the 3 big pipes and another 4mm pipe to fit to vacuum unit

Thanks
Mark


Top
User avatar
Blueshark
Posts: 1227
Joined: Tue Apr 07, 2009 9:28 pm
fill in the right answer: 10
Location: Vleuten, The Netherlands
Contact:
Contact Blueshark

Re: Mk1 distributor issue

Post by Blueshark »

markchez wrote:Hi

So this has the 3 big pipes and another 4mm pipe to fit to vacuum unit

Thanks
Mark
This one is complete, three big pipes (one already used) and also two smaller pipes where one can be capped of.

Joost


Top
Post Reply

Return to “Engines”