having starting problems -tried a new coil ( Bosch identical swap) but my Haynes manual suggests a faulty ballast resistor- has anyone had this and if so how do I replace it- the wiring diagram has a non colour coded wire from the positive of the coil into the ignition but not clear.
Darlowolf
Forum Update: This forum is now a legacy platform with limited activity. We recommend joining our Facebook group for the latest discussions and updates. The forum will remain online and usable but it's classed as an archive.
Users are NOT sync'd between the website and the forum. This means you MUST create an account for both.
Users are NOT sync'd between the website and the forum. This means you MUST create an account for both.
Ballast resistor
Forum rules
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
-
Darlowolf
- Posts: 13
- Joined: Tue Apr 21, 2009 7:40 pm
- fill in the right answer: 10
- Location: Darlington County Durham
Ballast resistor
ComeonyouWolves
-
Nate
- Posts: 4045
- Joined: Thu Apr 02, 2009 10:37 pm
- fill in the right answer: 10
- Location: Cirencester / Swindon
Re: Ballast resistor
can you give a dit more info about the fault? might help us to diagnose it.
-
Darlowolf
- Posts: 13
- Joined: Tue Apr 21, 2009 7:40 pm
- fill in the right answer: 10
- Location: Darlington County Durham
Re: Ballast resistor
Car starts and fires up then cuts out as key released fuel and spark present, runs fine if +ve of coil shorted to battery +ve- according to Haynes this means ballast resistor faulty- ballast resistors provide a huge mass of conflicting blogs on the net.
ComeonyouWolves
-
Nate
- Posts: 4045
- Joined: Thu Apr 02, 2009 10:37 pm
- fill in the right answer: 10
- Location: Cirencester / Swindon
Re: Ballast resistor
my immediate thought is dodgy ignition switch. i'll go have a quick check of the wiring diagram to remind myself how it's connected, and get back to you...
-
roccodave
- Posts: 85
- Joined: Tue Apr 28, 2009 5:01 pm
- fill in the right answer: 10
- Location: plymouth
Re: Ballast resistor
my ignition switch did similar to me ages ago if i pulled the wires to a certain position it would run try fiddling with the wires on the back of the ignition switch and see if it will run