Hi
I intend to re-instate the boot light in my MK2 shortly.
The switch in the hatch opening is still there with one wire (looks like black or brown/white) disappearing forwards behind the inner wing.
I've had a look at the Haynes wiring diagram but its not tremendously clear (to me at least - Triumph wirng diagrams are much simpler ) which other wires should be connected and to/from where!
If anyone could clarify for me I'd be much obliged.
Thanks
Jeff
Boot light
Forum rules
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
-
- Posts: 118
- Joined: Fri Oct 26, 2012 10:46 am
- fill in the right answer: 15
- Location: Harrow, NW London
Boot light
The Triumph Twins - 1973 GT6 and 1980 Dolomite 1850HL
The Karmann Krew - 1986 'Rocco GTX, 1995 Corrado 2.0
MGB roadster - the "Dark Side"
The Karmann Krew - 1986 'Rocco GTX, 1995 Corrado 2.0
MGB roadster - the "Dark Side"
-
- Posts: 4045
- Joined: Thu Apr 02, 2009 10:37 pm
- fill in the right answer: 10
- Location: Cirencester / Swindon
Re: Boot light
There should be a brown/white which is the switched earth and a +ve feed that iirc should be black.
Re: Boot light
If you can't find it, just run another +ve feed from something else near by like the rear lights.