Sorry to hear what happened, but glad you are making a recovery!

If you are talking about the parcel shelf there should be know holes, either side should be two 4x6 inch speakers as well as the front. I believe nokia speaker are what i took out of mine, i still got them if you want some photos all ...

So i just tried to give my car some welly, and it jolted abit, and went i went to pull off she wouldnt go. She starts up fine but sounds like a miss fire to my untrained ears?
The can will roll on the clutch but wont drive, any ideas ? Please help!

Sent from my SM-G960F using Tapatalk

So little up date, changed the ignition coil after reading someone elses post and seems to have sorted it! Thanks guys

Sent from my SM-G960F using Tapatalk

Can any one advise me on a new fuel pump and hoses for my 1992 gt2 1.8 carb?

Thanks.

Sent from my SM-G960F using Tapatalk

So i fancy give the gear linkage replacement a go.
Anyone have a link to the parts i need?

Mk2 gt2 1992

Thanks

Sent from my SM-G960F using Tapatalk

So i like in south London ( Croydon) can anyone recommend somewhere for paint correction? Wheel arch scratches and stone chip gone rusty? Surface rust only i believe?

Sent from my SM-G960F using Tapatalk

The neck fuller is not in a good way, i have it booked in for early next month, i just went out to start her and it started with a little gas then iddle fine. Bloody car just gave it v power and a clean. Never happy

Sent from my SM-G960F using Tapatalk

Someone help me please!!!
So i was driving along all was fine, i gave it some welly and when i came to stop she stalled! , tried to start her up again and she said no!
I managed to get her started with a little bit of gas and gently got it home.

Now it wont start and if i do mangae to start ...

Sorted thanks guys! One last question, bit of a 'wizzing' sound is this normal on a new belt or have i tightened it to much? Can twist 90° tho

Sent from my SM-G960F using Tapatalk

Thank you guys! Thats this weeks job!
My first job ever in the engine bay!

Sent from my SM-G960F using Tapatalk

Is the drive/altornator belt easy to re-place?
Mk2 scirocco gt2, no p.a.s no ac.
Is it as simple as loosening the alternator and slipping it on?

Sent from my SM-G960F using Tapatalk

mr.brown wrote:There's nothing that rotates near the handbrake. As mentioned above it's most likely to be driveshaft/CV related and the noise is just radiating down the tunnel.

Thank you! Ill have to get it looked at!


Sent from my SM-G960F using Tapatalk

I see you posted up on "facecloth" a video with the noise, sounds like metal on metal scrapping to me, I guess it's something to do with the exhaust if it's near the handbrake, there's a few heat shields down there so perhaps an exhaust rubber hanger has broken and the exhaust is rubbing on a metal ...

Seem to have a squeaking noise coming from what sounds like handbreak area. It seems to be related to the speed of the wheels not the revs, as i get fast the squeak does and slower ect. Also when i turn left it goes and then when i turn right it comes back. Any clue? Could be hand break related? Or ...

Rhys. I live in Crystal Palace.

The PHIRM are brilliant and that’s where I go.

There is another long established Workshop local to you, Tuningwerkes in south Croydon.


Haling Road.

Tell Reuben who owns it Sean sent you.

Happy to chat or meet up. Yes please, would be great!

Sent from my SM ...