Page 1 of 1
Knocking under turning
Posted: Tue Jun 14, 2011 11:02 am
by jeebz
When turning hard at slow speeds, usually at full lock, there is a knocking noise coming from the floor. CV's seem to be alright, as well as balljoints and trackrod ends. Wondered if this was a common fault or if anyone has had this before?
Re: Knocking under turning
Posted: Tue Jun 14, 2011 12:40 pm
by go-for-it1
Worn CV's normally the culprit for knocking on full lock. Don't know how you determine that the CV's seem to be alright. It could also be the front spring is not seated correctly.
Re: Knocking under turning
Posted: Tue Jun 14, 2011 5:23 pm
by ianaudia4
I would agree, CV joint.
Re: Knocking under turning
Posted: Wed Jun 15, 2011 6:07 am
by Nate
check wheel bolts, then cv joints
Re: Knocking under turning
Posted: Wed Jun 15, 2011 8:10 pm
by jupiter8
CV death rattle :(
Re: Knocking under turning
Posted: Thu Jun 16, 2011 12:08 am
by jeebz
ok, are there any favoured brands or types?