Page 1 of 1
clutch cable renforcing plate.
Posted: Mon Mar 14, 2011 8:15 pm
by duforus
Bake again guys, whats the best way to go about fitting a bulkhead plate for the clutch cable? Seems to be very tight on accessability, especialy for my donnies!!!!
Re: clutch cable renforcing plate.
Posted: Tue Mar 15, 2011 8:08 pm
by Old Mac Rocco
Have a look here, it may help you.
If not, do a search on here using "clutch cable plate".
Good Luck.
Re: clutch cable renforcing plate.
Posted: Wed Mar 16, 2011 2:46 pm
by MikeH
GSF Sell them - or they did recently. If the engine is out, and you're handy with a welder, then make up a plate and weld it on. Otherwise, get the self-adhesive jobs from GSF.
The last time I bought one they did two types - the scirocco one which is smaller, and the mk1 golf one which is bigger, and will last longer, but needs to be trimmed to fit around the pipes and cables at the bulkhead.
Re: clutch cable renforcing plate.
Posted: Wed Mar 16, 2011 7:31 pm
by Old Mac Rocco
I could have sworn I put some links on the second post on here ??????????????
Strange.