Scirocco Register

do they fit a mk2 rocco?

i have been told (cant remember by who or when) that they are plug and play?

I have them fitted! Think you need the non MFA thicker/later set. Can check part numbers tomorrow for you dude if nobody else can advise

Alex

i fitted them to mine. the only difference was that they sit level with each other, unlike the stock rocco item, so you will need to trim the steering column cowl slightly

Nate wrote:i fitted them to mine. the only difference was that they sit level with each other, unlike the stock rocco item, so you will need to trim the steering column cowl slightly

thats why i want to put them on :)

just think they look a bit better.

ill be getting some next time im at the scrap yard, thanks guys

You can get the MFA stalks to fit too



Deffinately hard to find though, need to be from an early MK2 Golf without the hazard switch mounted on the column!

loving the coraddo dash :)
i dont have a mfa on this one, all though are they hard to retro fit?

Pre-'89 ones from CE1 electrics cars are the same, as mentioned above - golfs with the hazard switch on the dash, not the column. The pic above looks like CE2 / 90 spec stalks to me.