Scirocco Register

right my oil leak def seems to be down to the oil switch

see:- http://sciroccoregisterforum.co.uk/carf ... f=9&t=7927

now the problem i have is that i'm waiting on one arriving and my MOT is tomorrow morning.

if it doesn't arrive can i just block the hole in the sender with a tight screw and super glue and fit it as a temporary measure?

my reasoning is it'll stop the oil coming out, my worry is that this might create other problems.

can i have your thoughts guys

remove the sendor and find a bolt t fit in there bit of plumbers take should be ok

You might find that the oil light flashes and the warning buzzer sounds over 2000 rpm.

Thankfully the bits arrived before i had to bodge it!