Page 1 of 1

Heater Valve

Posted: Sun Oct 24, 2010 3:21 pm
by Risocco
Hey guys, my valve inside the engine bay won't move fully up to the hottest position. Is there a little trick to try or time to change the unit?

Cheers guys

Alex

Re: Heater Valve

Posted: Sun Oct 24, 2010 8:43 pm
by fonzooorooo
if it's sticking, the lever won't move all the way. Assuming lever and cable are ok, sounds like new valve time... available from the dealers (checked a few months ago when mine wouldn't turn off!)

Re: Heater Valve

Posted: Mon Oct 25, 2010 1:10 pm
by DannyH

Re: Heater Valve

Posted: Mon Oct 25, 2010 1:32 pm
by Risocco
Oh FFS! I just serviced the bugger too with fresh coolant! :ire:

Danny, I already got a spare unit, thanks for the link tho.

Well I know what I'm doing saturday!

Alex

Re: Heater Valve

Posted: Tue Oct 26, 2010 7:26 am
by fonzooorooo
you could just pop a clamp on the pipe each side the valve to save draining down... doesn't tend to work perfectly, but if you can wangle a bowl or something underneath too you'll be fine!