Scirocco Register

I have been trying to start my 16v conversion and I cant get a spark. All the wires are connected to the back of the fusebox, Im able to get a buz with the voltmeter on all the wires going to the ignition amplifier and the spark control box. I was wondering if i had a relay missing from the fusebox. Can someone post a picture of their 16v conversion fuse boxes so I can see if i have one missing or list the relays with their location.

Rich

When i did my 16v i never went near the fuse box..
Just removed the 8v ignition module, and wires to coil. Added the 16v module and ecu (ones fed from the other) connected the green to the coil a black to the coil another black to the earth on the battery..Job done

Are you trying to run a isv ?

I am at the minute but Ive got a pair of weber 40s im going to be putting on once Ive got them back from being refurbed.

Rich