Scirocco Register

Hi, I bought new wishbones for my GTX as the existing are extremely rusty. The main clamps supplied are as shown in the first photo below but my car has currently got those shown in the 2nd photo. I need photo 2 types as they are integral to the inner anti roll bar bushes. My question is has the supplier made an error and sent the wrong items? or did I order wrong? Bought from a good on line supplier I have used before. Any advice appreciated. Thanks

Sent from my SM-A415F using Tapatalk

Most wishbone kits come with the rear wishbone fitting for cars with out the front antiroll bar, as in the kit you brought.
Can you not re use your old ones? I quick lick of paint will make them look like new…?

Thanks for your reply.

Yes having checked costs and availability it looks like refurb and use the existing ones is the best option.

Cheers.

Sent from my SM-A415F using Tapatalk

I just did my timing belt cover.

Sent from my SM-A415F using Tapatalk

Wishbone rear mounts for cars with anti roll bars are getting hard to find and now expensive so I think that’s why most kits come with the basic mount.

https://www.ebay.co.uk/itm/254962697474 ... Swel9eXq6N

Cam cover looks good

If the rusty wishbones fitted to the car are genuine VW ones you will find they are more substantial than the Febi ones.
I’ve recently changed mine to a Febi kit and keeping hold of the old wishbones to refurbish at some point, my cars a daily so needed it back on the road ASAP.

Thanks for the advice. The existing look pretty bad to me but I will keep them anyway.



Sent from my SM-A415F using Tapatalk

They do look a bit to far gone… have a good check over them when you remove them and go from there.

Yes, too fat gone I think anyway job is done. Struts next.

Sent from my SM-A415F using Tapatalk

The bottom ball joints look like they are the original ones if they are riveted on?
If so they have lasted well…

Yes was thinking that 34 years. New wishbones fitted. All ok. Struts next.

Sent from my SM-A415F using Tapatalk

Your wishbones look as rusty as the originals I removed. I put Febi bones back but kept my originals. Will get them blasted and powder coated