Scirocco Register

From my experience, Mk2 Scirocco door sill trim clips are hard to come about and are quite brittle after time, so I've designed, 3D printed and tested some alternatives which are thicker and have less fiddly, bending parts. This replaces part number 533853831, shown as part 4 in the ETKA diagram below:



Incase anyone else on the forum could benefit from these, I'd be happy to 3D print some more for the cost of material, packing and postage.
For £15 via PayPal (craig.w@me.com):
- set of 12 clips (enough for both sides of car)
- 2nd class UK postage

See below for some photos and a short video showing installation and removal. Let me know if you have any questions or would be interested in a set!

Six of my clips fitted across sill:

One of my clips:

Original clip:

One of my clips on the trim:

One of the original clips on the trim:

3D Renders of my design:


Video showing installation and removal:

Yes please Craig, i'll have a set , PM me your details again and i'll send payment, cheers, Frank

Look good mate

Thanks Tom

yes please mate. pm your details and i'll sort you out some dosh. steve

Received today, very quick delivery and they are great! Highly recommend. Thanks Craig.

I'll definitely take a set of these Craig, I'll pm you later once I've sent the payment.

Thanks for these Craig, they look more robust than the originals

Great, very glad you're happy with them!

Paypal on it's way.
Have 'stickied' this too.

Fantastic, thanks for that! Popped them in the post box this evening.

just sent the paypal :)

Ive had some. Fantastic... i was goin to use double sided tape to fix mine back on!!

Cheers
Craig
Super fast
Bonnet stay clip and seat tilt knob next please !!!!

Bought these on eBay this week. Great job!!

I've made some more of these, if you buy them straight from me they're £15 posted to the UK. Otherwise, you can buy them on eBay too. https://www.ebay.co.uk/itm/323341652794
Let me know if you're interested!