Page 1 of 1

sa style clutch kits

Posted: Sat Jul 23, 2016 1:29 pm
by mark watson
i must say big thx to the guys on the register
basically all the goodies gone , sent the cantilever brake bars over mostly for the golf club guys but half did not bother to get back to me , but you guys rock as many on this forum took them for your golfs

a big thx to mrfunk for showing the interest and doing a write up for us

i am more than happy to organise more goodies to send that side if the guys want ,

things i am looking at is the clutch kits / leather trim for the seats and maybe door panels at later stage when mine pitch up in south africa / aftermarket management ( spitronics.co.za ) mine works a treat on the 2l 8 valve apk motor ( even the standard throttle based idle control works )
anything else that the guys maybe looking for ( have checked a local company out that do a lot off auto rubber mouldings - proautorubber.co.za )
their stuff looks good and maybe with exchange rate it will be worth it.

as said big thx guys , the rocco registry stickers will be proudly displayed on my rocco

Re: sa style clutch kits

Posted: Sat Jul 23, 2016 3:05 pm
by mr alpine92
thanks mark for putting you time out to sort us guys with part,and more then welcome to help you out chris

Re: sa style clutch kits

Posted: Sun Jul 24, 2016 1:27 am
by mark watson
thx chris , you are my go between guy and thx for all the effort

Re: sa style clutch kits

Posted: Sun Jul 24, 2016 2:53 pm
by mr alpine92
your welcome mark one more kit lift so anyone wont it pm mark i get it out to you ones it gone it gone chris

Re: sa style clutch kits

Posted: Sun Jul 24, 2016 5:10 pm
by james butler
Thanks for your contributions to the club mark.
At the very least Without you I doubt if we would ever have heard about those clutch kits.
I also thinks it's great to hear all about people's passions for these cars all around the world especially a project as interesting as yours seing as there's so much you are doing I haven't seen done before done so quickly.
I hope to see more of your project as it progresses n keep up the good work.

Re: sa style clutch kits

Posted: Sun Jul 24, 2016 6:14 pm
by mark watson
thx james

got a bit snowed under with work , all i have done so far that i have not posted is strip the inside bare so we can prep for paint , but have to wait for my stuff to come from london as the previous owner cut all the brackets off for the dashboard as he was trying to fit a mk4 golf dash , but luckily he left all the pieces inside the car , so i need the dash so i can reattach the original stuff back.
then it can go to get the rest of the leather trim , carpet came from vw heritage but a bit light for my liking so will send in to dye a bit darker

but as said it was a pleasure to supply the stuff and will do more in the future

Re: sa style clutch kits

Posted: Mon Jul 25, 2016 3:23 pm
by bengould
The spitronics managemant sounds very interesting.

Had a little look into it when you'd first mentioned it.

Just had my 20vt ecu re-mapped but might be something I'd look into in the future if I ever decide 200bhp isn't enough in a corrado.


Ben.

Re: sa style clutch kits

Posted: Mon Jul 25, 2016 3:53 pm
by mark watson
at the exchange rate now around 180 quid ( ecu / universal harnesses / 2.5 bar map sensor all software etc ) excluding postage , but very light so cant be more than 20 - 25 quid
nice thing is with any laptop you are set to go