Page 1 of 1

polybush bushes.

Posted: Tue Feb 25, 2014 4:13 pm
by essextom
has anyone fitted there car with poly bushes? if so is it worth the money? and how harsh is the ride?

Re: polybush bushes.

Posted: Tue Feb 25, 2014 5:00 pm
by Nate
Cant remember which brand, but I put poly bushes on the front of my scala. Too harsh for me, they got replaced with rubber within a month

Re: polybush bushes.

Posted: Tue Feb 25, 2014 5:59 pm
by essextom
thats what im worried about. think ill just replace with ruber one

Re: polybush bushes.

Posted: Tue Feb 25, 2014 8:49 pm
by Mr Funk
Depends what you're looking for. Mine firmed everything up but I stayed away from poly engine mounts as I like my teeth intact. Other than that it's all poly

Re: polybush bushes.

Posted: Tue Feb 25, 2014 9:15 pm
by essextom
maybe illjust do roll barsand rear beam and see how that feels

Re: polybush bushes.

Posted: Tue Feb 25, 2014 10:32 pm
by whiteshark
Do both roll bars and if you have a four branch fitted and you don't want it cracked do engine mounts as we'll. The rest are very optional.

Re: polybush bushes.

Posted: Tue Feb 25, 2014 10:44 pm
by Nate
Personally i'd rather stick a big flexi section into the exhaust than fit poly mounts. That and a mild steel rather than stainless, as much less prone to cracking

Re: polybush bushes.

Posted: Thu Feb 27, 2014 3:15 pm
by essextom
cheers for the advise

Re: polybush bushes.

Posted: Sun Mar 02, 2014 12:44 am
by vr_powered
Fitted polybushes to the old gtx's anti roll bars and rear beam, small improvement in handing but was a lot harsher than rubber, its a shame vw have discontinued the bushes as theres not a lot of decent rubber bushes available now

Re: polybush bushes.

Posted: Thu Mar 06, 2014 6:03 pm
by Vonlard
I have the "prothane???" kit on mine, think it was about £70 from GSF. Didn't instal the side engine mount inserts as they wouldnt fit but the front and back mounts helped launch loads as it eliminates the rocking of the engine under hard acceleration. also got rear arb bushes from crazy qyiffs as the gsf kit doesn't include them. was gonna do the front when I uprate the arb's. I think it is well worth it for the cost and potential savings from by keeping your suspension alignment tighter. Rear beam is a pain getting the old bushes/bolt out (I recommend fire). mine is low stripped out and noisy so cant comment on sacrifice of comfort but I'd do it again