Page 1 of 1
Clutch Kit (GT2 EX Engine)
Posted: Mon Jan 13, 2014 11:10 am
by Rocco19
Hi,
would anyone know if with a clutch kit for a mk2 GT2 EX engine would have a bearing with it? Because when I look them up they don't seem to have one but only this plate with a ring looking clip and I was unsure if that counted as the bearing or not. Any info would help greatly.
Re: Clutch Kit (GT2 EX Engine)
Posted: Mon Jan 13, 2014 12:05 pm
by ianaudia4
Do you mean the thrust bearing? They don't usually come in the kits I have bought, about a fiver to buy separately.
Re: Clutch Kit (GT2 EX Engine)
Posted: Mon Jan 13, 2014 4:15 pm
by james butler
also order the end plate on the gearbox because u will destroy it getting it out to gain access to the bearing.
Re: Clutch Kit (GT2 EX Engine)
Posted: Mon Jan 13, 2014 4:23 pm
by james butler
one more thing,
when changing the bearing be careful with the clutch lever on the gearbox, if you let it drop too much the release arm in the gearbox that's supposed to rest on the bearing contacts the new end plate you have fitted, which not only pops it out but also distorts it so it wont stay in properly! very annoying!
Re: Clutch Kit (GT2 EX Engine)
Posted: Thu Jan 23, 2014 1:43 pm
by Rocco19
Hi,
thanks for the reply, although found at last week it was to do with the gear linkages and not the clutch at all
thanks all the same :)
Re: Clutch Kit (GT2 EX Engine)
Posted: Thu Jan 23, 2014 4:57 pm
by ianaudia4
Rocco19 wrote:Hi,
thanks for the reply, although found at last week it was to do with the gear linkages and not the clutch at all
thanks all the same :)
Result