Page 1 of 1

90 degree pin type dizzy cap ?

Posted: Tue May 14, 2013 8:31 pm
by whiteshark
I recently purchased some new HT leads for the Rocco. My new leads are pin type and not din type. Because the engine is a 16v KR I will have to fit a 90 degree pin type dizzy if i want them to fit. Any one have a part number or model of another VW that would fit the bill? The Saab 900, 205GTi and Hyundai coupe are all din type. My last visit to VW was of no use and Euro Car parts were not able to get past the numberplate identification scenario.

Re: 90 degree pin type dizzy cap ?

Posted: Tue May 14, 2013 11:56 pm
by Tim_R
mk 3 golf 16v ABF dizzy cap will do what you need. Also found in various 90s Seats. You'll probably need the locating notch cutting out the cap to get it lined up on a Kr dizzy base though.

Re: 90 degree pin type dizzy cap ?

Posted: Wed May 29, 2013 9:51 pm
by Mr Funk
I'm breaking a mk3 abf at the mo. want me to see if ours is going spare?

Re: 90 degree pin type dizzy cap ?

Posted: Wed May 29, 2013 11:37 pm
by Nate
Surely easier to just get some leads with the correct ends on?