Page 1 of 1
Damn Washer Bottle
Posted: Thu Sep 29, 2011 4:16 pm
by jbo
Hi All,
I completely reloomed my car and it seems that im missing the washer bottle plug. Can someone with an injection car have a look and see where it traces too? Is it part of the whole loom or does it plug into a connector somewhere.
JAson
Re: Damn Washer Bottle
Posted: Mon Oct 10, 2011 9:11 am
by jbo
Anyone?
Jason
Re: Damn Washer Bottle
Posted: Fri Oct 14, 2011 8:48 pm
by jbo
Bump
Re: Damn Washer Bottle
Posted: Wed Oct 19, 2011 9:57 am
by Nate
have you got any spare connectors anywhere? i haven't got an injection car to check on, sorry
Re: Damn Washer Bottle
Posted: Fri Feb 24, 2012 4:09 pm
by jbo
Nate wrote:have you got any spare connectors anywhere? i haven't got an injection car to check on, sorry
No spare connectors im afriad.
Does anyone have an injection rocco they could tracce the wires back to? A picture of the connector would also help along with wire colours.
Re: Damn Washer Bottle
Posted: Fri Feb 24, 2012 5:47 pm
by Mr Funk
I can have a peeky tomorrow.
Re: Damn Washer Bottle
Posted: Fri Feb 24, 2012 7:05 pm
by jbo
Aweeeesome! Much appreciated!
Re: Damn Washer Bottle
Posted: Fri Feb 24, 2012 11:34 pm
by mr.brown
It's a two-pin plug - female spade terminals perpendicular to each other. Wire colors are green/red and brown.
Unfortunately, I've just chucked my mk2 harness but from what I remember I'm sure the wires run along the front of the car with headlamp/indicators and come out in the left corner.
Re: Damn Washer Bottle
Posted: Sat Feb 25, 2012 9:41 am
by jbo
mr.brown wrote:It's a two-pin plug - female spade terminals perpendicular to each other. Wire colors are green/red and brown.
Unfortunately, I've just chucked my mk2 harness but from what I remember I'm sure the wires run along the front of the car with headlamp/indicators and come out in the left corner.
Thanks for looking!
Hmm that's a bugger. Annoyingly I left the front loom in the car (gt2) and installed the engine loom from the 16v into it. As the gt2 runs the washer on the opposite side the wires aren't there. At least if i know the wire colours I can make up a loom form the fuse box maybe.
Unless anyone knows if the front loom plugs into a connector into the engine loom? I couldnt find any spares though!