Scirocco Register

Posted: **Thu May 14, 2009 5:18 pm**

Mr Funk wrote:Dear God.
That car looks fantastic!

Seconded

Posted: **Thu May 14, 2009 6:01 pm**

I'm loving the Audi badge and stripe as the grille. I've got an Audi badge. Hmmm...

Posted: **Thu May 14, 2009 6:13 pm**

It has an Audi badge because it is an Audi!

It is an Audi 50, these were then built by VW and renamed Polo.

Posted: **Thu May 14, 2009 6:55 pm**

Is it?! Never seen that model. Am I on my own on this one? Anyway, I liked the idea of the air travelling in through four holes rather than a grille. Probably just me being weird. So what model is it? Thought it was some kind of highly modded/bodykitted golf.

Posted: **Thu May 14, 2009 7:08 pm**

Theres one on ebay at the moment in a sorry state chap wants £1000 to take it off him now otherwise its £100 auction price atm

Posted: **Thu May 14, 2009 8:34 pm**

Junglist wrote:So what model is it?

ianaudia4 wrote:It is an Audi 50, these were then built by VW and renamed Polo.

Posted: **Thu May 14, 2009 9:29 pm**

Nice to know I wasn't being stupid for thinking it was VW despite the audi badge then. In fact, quite perceptive I'd say. Smug.

Posted: **Thu May 14, 2009 11:00 pm**

£1000, which Asylum are these sellers getting day release and access to the internet from???

Posted: **Thu May 14, 2009 11:25 pm**

in fact its not an audi 50 its a polo mk1

http://cgi.ebay.co.uk/1977-VW-Volkswage ... 548wt_1165

Posted: **Thu May 14, 2009 11:41 pm**

Again £1000, a pile of shite is the best way to describe that thing. The sellers must still believe in Santa Claus!

I am totally VAG through and through but I can't beleive people are trying to flog crap like this.
Yes I know some of us have bought a rough Scirocco over the years and made good again but for a
MK1 Polo,which are not exactly anything special.

Posted: **Fri May 15, 2009 8:46 am**

Standard bonnet, cut out the entire centre section, sheet aluminium, rivet gun. Job done.

Posted: **Fri May 15, 2009 10:44 am**

Anybody had chance to weigh a std bonnet yet?

Good idea Mr B. Think will have to do some experimenting when the time comes.

Btw expect a thread later on the proper GRP/Carbon bonnets...

Posted: **Fri May 15, 2009 11:09 am**

filmidget wrote:
roccodave wrote:a freind of mine took all of the strengthening bars off of a polo one and fitted bonnet pins
doing 40mph down the road the middle of the bonnet would flap about and lift about 4inches in the middle
the drag created probably far outweighed the advantage of the weight saving
Like this i guess?

(piccy lifted from a threaad on RetroRides)

Although I imagine that could also be a very light weight grp job.

I think is you are careful with what you remove, a bit of weight could be lost from a standard steel bonnet without it turning into a flappy mess ie keep the bracing on the leading edge. Only worth doing if you have taken steps to remove weight obvious from elsewhere first though, like race seats, stripped interior, polycarb windows, etc etc.

Can't see removing the original bracing and then trying to put back a thinner version being very effective/efficient, and would probably end up with a warped panel anyway...

exactly like that with a lot of flapping about
it took me ages to stop laughing and tell him what i was laughing at
he is a bit shorter than me and couldnt see it unless he sat up a bit

Posted: **Fri May 15, 2009 1:01 pm**

I have just spent the last 90mins looking at Berg Cup images and videos... not 1 second wasted imo! Thankyou filmidget!

Posted: **Fri May 15, 2009 1:08 pm**

I didn`t hear anything else back from that place .Liking the idea of removing the steel and replacing with ally though.

Just lifted this off Vortex

Looks interesting,group buy from the states ?

For the widebody, contact precisionmotorsports@comcast.net or call Tom Kelly at 508-634-8588. Here are the prices on theirs:

Hood: $275
Fenders :$225/each
Full rear 1/4's: $250/each
Rear flares only: $100/each
Hatch: $225

All parts are in fiberglass, and look pretty damn good. Here are Neil Tovsen's and Andrew Cordeiro's cars, respectively, with their kits:

I like

Scirocco Register

Bonnet Query (Filmidget)

Re: Bonnet Query (Filmidget)

Re: Bonnet Query (Filmidget)

Re: Bonnet Query (Filmidget)

Re: Bonnet Query (Filmidget)

Re: Bonnet Query (Filmidget)

Re: Bonnet Query (Filmidget)

Re: Bonnet Query (Filmidget)

Re: Bonnet Query (Filmidget)

Re: Bonnet Query (Filmidget)

Re: Bonnet Query (Filmidget)

Re: Bonnet Query (Filmidget)

Re: Bonnet Query (Filmidget)

Re: Bonnet Query (Filmidget)

Re: Bonnet Query (Filmidget)

Re: Bonnet Query (Filmidget)