Page 2 of 2
Re: Cambelt cover
Posted: Thu Feb 14, 2019 8:53 pm
by frlrubett
PeteGLi wrote: Thu Feb 14, 2019 7:52 pm
What part number did Heritage supply? 049109175 or 026109175A, because I think you will find that they are exactly the same.
The picture on the oemepc site referred to above, looks nothing like the actual part!
It will fit the top metal cover, but as mark1gls says - you have to remove the top cover in order to fit the bottom cover.
Top cover was removed to make way for the bottom. I will know more tomorrow and have some pics. They supplied 026109175A
Re: Cambelt cover
Posted: Thu Feb 14, 2019 9:44 pm
by mark1gls
That’s the later lower cover so that’s why it’s not fitting the original metal top cover.
Part 16.
https://volkswagen.7zap.com/en/rdw/golf ... /109-9005/
Type you have for metal top cover.
https://volkswagen.7zap.com/en/rdw/golf ... /109-9000/
Looks like heritage has supplied the wrong part for your car....
I think you want this part, 049109175. I can check the part number on my 1988 car tomorrow.
If you search the part number above.
https://www.ebay.co.uk/itm/Mk1-Golf-GTI ... SwbP1aczIE
Same if I search 1988 Mk2 Scirocco...
https://volkswagen.7zap.com/en/rdw/scir ... /109-9000/
Shows out of stock at VW heritage..
https://www.vwheritage.com/049109175-lo ... v-vw-spare#
Re: Cambelt cover
Posted: Thu Feb 14, 2019 10:45 pm
by frlrubett
thanks, I will have a look also at my car and see whats what
Re: Cambelt cover
Posted: Fri Feb 15, 2019 10:27 pm
by mark1gls
I've had a look and the lower plastic cam belt cover is part No. 049109175.
Re: Cambelt cover
Posted: Wed Feb 27, 2019 6:05 pm
by frlrubett
So finally here are some pics of the existing cover.
53366847_407938126442619_8858447640879169536_n.jpg
Re: Cambelt cover
Posted: Sat Mar 02, 2019 11:50 am
by PeteGLi
A pic of the lower cover - 026109175A - that you were sent, would be good.
Re: Cambelt cover
Posted: Tue Mar 12, 2019 4:08 pm
by frlrubett
53535838_2083601138422294_7130102515491667968_n.jpg
Here you go, thanks for your help.